Independent stampin' up! demonstrator uk, since 2010 Handmade cards, Rubber stamping, stamping techniques, card making ideas, Stampin' up Stampin' up, card making inspiration, scrapbooking, papercrafts.

Showing posts with label Stampin up Easter friends. Show all posts
Showing posts with label Stampin up Easter friends. Show all posts

Saturday, 29 January 2022

Easter treat holder



I'm resurrecting an oldie but a goody for this year's Easter treat packaging, but this time I 've decorated them with the stamped image from the Easter Friends stamp set rather than punch art rabbits.
To make this  you'll need:
 A piece of white card 4 1/2 inches  by 10 1/2 inches.
A piece of  spring coloured card 4 by 4 inches
A second piece of coloured card  4 inches by  3/4 of an inch. 
Basic white card 4 inches by  2 inches for stamping.
 2 circle dies, one slightly smaller than the other,
The chick stamp the  from Easter Friends Set
A regular hole punch and  approximately18 inches of ribbon.

Taking the large piece of white card, on the long edge score across the card  at,  4  1/4  inches ,   4   3/4 inches,    5  1/4 inches,   and at  9  1/2 inches.
Fold the middle of the three score lines,  then fold the two outer score lines in the opposite direction to create an accordion fold.
On the side without the flap, cut an aperture  using the smaller of the circle dies, approximately 3/4 of an inch from the first score line. Before you cut the aperture double check the flap isn't going to cover the aperture when closed.
Place the coloured card over the aperture making sure you have an even border, flip both pieces of card over and draw around the aperture. 

Place the larger die over the  drawn circle and die cut the circle.


Adhere the coloured layer over the aperture in the base. See  photo below.

 Adhere the small piece of coloured card to the top flap.



Stamp the chick three times in a straight line. Colour the chicks.
 

Drawn a line across the card just above the chicks claws.
Cut the chicks out above the line but not below. 
Colour the space between each chicks legs the same colour as your background card. This will save you  cutting out this section and retain what little strength there is in the legs.

Using a blending brush or a dauber brush and a little crumb cake ink over the base to tone down the white. Then trim the base down to about 1/4 of an inch deep.

Using a regular hole punch, punch two holes through  all three layers at the top of the treat holder.  Make a note of how much of the chicks will overlap the aperture .  Apply glue to the parts  of the chicks that don't overlap the aperture. You don't want the chicks to be adhered to the cello bag.
 Adhere the chicks to the bottom of the treat holder. 


Fold over  the top of a  4 inch wide cellophane bag and punch two holes.
Fill the bag with treats.

Thread the ribbon through the back , through the cello bag the front and finally through the holes in the flap and tie a bow.

Hubby liked this project, He thought it was something I had bought rather than made.